Zilog Z8F0130 - Manual (Page 142)

Using the Integrated Development Environment UM013037-1212
118
Zilog Developer Studio II – Z8 Encore!
User Manual
Update All Dependencies
Select Update All Dependencies from the Build menu to update your source file depen-
dencies.
Set Active Configuration
You can use the Select Configuration dialog box to select the active build configuration
you want.
1. From the Build menu, select Set Active Configuration to display the Select Config-
uration dialog box.
2. Highlight the configuration that you want to use and click OK .
There are two standard configuration settings:
•
Debug
This configuration contains all of the project settings for running the project in Debug
mode.
•
Release
This configuration contains all of the project settings for creating a Release version of
the project.
For each project, you can modify the settings, or you can create your own configurations.
These configurations allow you to easily switch between project setting types without hav-
ing to remember all of the setting changes that must be made for each type of build that
can be necessary during the creation of a project. All changes to project settings are stored
in the current configuration setting.
To add your own configuration(s), see the Manage Configurations section on page 119.
Use one of the following methods to activate a build configuration:
Figure 74. Select Configuration Dialog Box
Note: