Zilog Z8F0130 - Manual (Page 544)

Appendix D. Using the Command Processor UM013037-1212
520
Zilog Developer Studio II – Z8 Encore!
User Manual
The Flash Loader dialog box and the Command Processor interface use the same pa-
rameters. If an option is not specified with the Command Processor interface, the current
setting in the
Flash Loader dialog box is used. If a setting is changed in the Command
Processor interface, the Flash Loader dialog box settings are changed .
Examples
The following are valid examples:
FLASH Options INTMEM

FLASH Options "c:\testing\test.hex"

FLASH BURN REPEAT
or
flash options intmem

flash options "c:\testing\test.hex"

flash burn repeat
The file test.hex is loaded into internal Flash memory. After the flashing is completed,
you are prompted to program an additional unit.
FLASH VERIFY
The file test.hex is verified against internal Flash memory.
FLASH SETUP
The current Flash Loader parameters settings are displayed in the Command Output win-
dow.
FLASH HELP
The current Flash Loader command options are displayed in the Command Output win-
dow.
Flash Options PBF
Flash ERASE Erase Flash memory
Flash ERASE REPEAT Erase Flash memory and repeat
Flash BURN Program Flash memory
Flash BURN REPEAT Program Flash memory and repeat
Flash BURNVERIFY Program and verify Flash memory
Flash BURNVERIFY REPEAT Program and verify Flash memory and repeat
Flash VERIFY Verify Flash memory
Flash VERIFY REPEAT Verify Flash memory and repeat
Caution: