Zilog Z8F0130 - Manual (Page 76)

Using the Integrated Development Environment UM013037-1212
52
Zilog Developer Studio II – Z8 Encore!
User Manual
12. Select the Use Page Erase Before Flashing checkbox if you want the internal Flash
to be page-erased. Deselect this checkbox if you want the internal Flash to be mass-
erased.
13. Select the appropriate target from the Target list box.
14. Click Setup in the Target area. Refer to the Setup section on page 111 for details on
configuring a target.
Click Add to create a new target (see the Add section on page 112) or click Copy to copy
an existing target (see the Copy section on page 113).
15. Select the appropriate debug tool and (if you have not selected the Simulator) click
Setup in the Debug Tool area. Refer to the Debug Tool section on page 114 for
details about the available debug tools and how to configure them.
16. Click Next . The Target Memory Configuration step of the New Project Wizard dialog
box is displayed.
Figure 38. New Project Wizard Dialog Box, Target and Debug Tool Selection
Note: