10 miscellaneous settings / autres réglages – Pioneer DV-939A User Manual
Page 138
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

10 Miscellaneous Settings / Autres réglages
You can create a shortcut menu of up to 5 setup menu items that you
often access. Rather than navigate through the whole setup menu
each time you want to alter a setting, you can access the setting
straight from the shortcut.
Vous pouvez créer un menu de raccourci pour 5 paramètres du menu
d’installation auxquels vous accédez fréquemment. Plutôt que de naviguer
dans tout le menu d’installation chaque fois que vous voulez modifier un
réglage, vous pouvez directement accéder à ce paramètre grâce au raccourci.
To add a menu item to the shortcut list:
1 Press SETUP.
2 Select the menu item you want to add.
3 Press FUNCTION MEMORY.
The item is marked
FM.
(Some items in the Setup menu
cannot be added to the shortcut menu. In this case, the &
mark is displayed on-screen.)
4 Repeat steps 2 and 3 to add up to five items to
the shortcut menu.
5 Press SETUP to exit.
To use the shortcut menu:
1 Press FUNCTION MEMORY.
Function Memory I________
On Screen Display
r
2 Select the item you want using the joystick and
press ENTER.
3 The Setup menu opens on the item you se
lected.
Select from the options in the normal way.
4 Press SETUP to exit.
Pour ajouter un paramètre de menu dans la liste des
raccourcis:
1 Appuyez sur SETUP.
2 Sélectionnez Toption de menu que vous voulez
ajouter.
3 Appuyez sur FUNCTION MEMORY.
L’option est identifiée par
FM.
(Certains paramètres du menu
Setup ne peuvent être ajoutés au menu de raccourcis. Dans ce
cas, le symbole apparaît sur l’écran.)
4 Répétez les points 2 et 3 pour ajouter jusqu'à
cinq paramètres au menu de raccourcis.
5 Appuyez sur SETUP pour quitter.
Pour utiliser le menu de raccourcis:
1 Appuyez sur FUNCTION MEMORY.
Function Memory 1_
On Screen Display
2 Sélectionnez le paramètre voulu à l'aide du
joystick et appuyez ensuite sur ENTER.
3 Le menu Setup s'ouvre sur le paramètre que
vous avez sélectionné.
Sélectionnez les options suivant la procédure normale.
4 Appuyez sur SETUP pour quitter.
E n / F r