beautypg.com

8 audio settings / paramètres audio – Pioneer DV-939A User Manual

Page 110

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

8 Audio Settings / Paramètres audio

Default setting:

On

If at any time you need to switch off the digital audio output, set this

to

Off,

otherwise leave it

On.

Note that you can’t switch on/off the

optical and coaxial outputs individually

Audio 1 > Digital Out >

On

Off

Audiol [

a

Dolby Digital Out - Dolby Digital

DTSOut- Off

Linear PCM Out - Down Sample On

MPEG Out- MPEG ► PCM

DOn
a Off

Move

;xit

Default setting:

Off

When watching Dolby Digital DVDs at low volume, it’s easy to lose the

low level sounds completely—including some of the dialog.

Switching on the

Audio DRC

(Dynamic Range Compression)

setting can help things by bringing up the low level sounds, while

keeping the lid on high level peaks.

The

Off

setting leaves the original dynamics intact;

High

‘squashes’ the dynamics the most, but exactly how much difference

you can hear between the settings will depend on the material you’re

watching.

Audio 2 > Audio DRC >

High

Medium

Low

Off

Remember:

Audio DRC is only effective with Dolby Digital audio

sources.

Réglage par défaut:

On

Si vous devez à un moment donné couper la sortie du signal audio

numérique, réglez-la sur

Off;

sinon, laissez-la sur

On.

Gardez à

l’esprit que vous ne pouvez pas activer/désactiver individuellement les

sorties optique et coaxiale.

Audio 1

Digital Out >

On

Off

Audiol I

I I

Dolby Digital Out- Dolby Digital

DTSOut- Off

Linear PCM Out - Down Sample On

MPEG Out- MPEG ► PCM

M W é

Move

Réglage par défaut:

Off

Lorsque vous visionnez des DVD Dolby Digital à faible volume, vous

risquez de ne pas percevoir complètement les sons de faible niveau—

y compris une partie des dialogues. La commutation du réglage

Audio DRC

(Dynamic Range Compression) peut améliorer les

conditions d’écoute en augmentant les sons de faible niveau tout en

limitant les crêtes de haut niveau.

Le réglage

Off

laisse la dynamique du son original intacte; le

réglage

High

“ écrase ” au maximum la dynamique, mais la

différence réellement perceptible entre les réglages dépend du

programme que vous êtes en train de visionner.

Audio 2 > Audio DRC >

High

Medium

Low

Off

N'oubliez pas:

Audio DRC est uniquement opérant avec les

sources audio Dolby Digital.

E n / F r