8 audio settings / paramètres audio – Pioneer DV-939A User Manual
Page 112
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

8 Audio Settings / Paramètres audio
Set in Setup Navigator (Default:
2 Channel)
If you connected this player to your amplifier using the 5.1 channel
analog outputs (front, surround, center and subwoofer outs), set this
to
5.1 Channel;
if you connected only the stereo outs, set to
2 Channel.
• Evenifyouset
Audio Out
to
5.1 Channel,
you’ll only
get sound from all speakers when playing a multi-channel
DVD-Audio disc, or Dolby Digital, DTS or MPEG encoded DVD
disc.
• If you set to
2 Channel,
Dolby Digital, DTS and MPEG
audio is mixed down to two channels so you still hear all the
audio recorded on the disc.
• During the slideshow section of a DVD-Video disc it can take up
to 30 seconds for the
Audio Out
setting to take effect.
• Some DVD-Audio discs don’t allow down-mixing of audio.
These discs always output multi-channel audio regardless of
the setting made here.
Audio 2 > Audio Out
> 2Channel
5.1 Channel
|Audio2|
\
Audio PRC-Off
||2 Channel
Speaker Setting 5.1 Channel
Gain Setting - Fix
CD Digital Direct-Off
^^É^Move
hannel
Sélectionnez la sortie dans le navigateur d’installation (sortie par
défaut:
2 Channel)
Si vous avez raccordé ce lecteur à votre amplificateur à l’aide des
sorties analogiques à 5,1 (sorties avant, surround, centrale et
d’extrêmes-graves), réglez ce paramètre sur
5.1 Channel;
si vous
avez uniquement connecté les sorties stéréo, réglez-le sur
2 Channel.
• Même si vous réglez
Audio Out
sur
5.1 Channel,
le son
ne sera diffusé par tous les haut-parleurs que pendant la
reproduction d’un DVD audio multicanaux, ou d’un DVD à
codage Dolby Digital, DTS ou MPEG.
•
Si vous le réglez sur
2 Channel,
les signaux audio Dolby
Digital, DTS et MPEG sont mixés en aval en deux canaux de
sorte que vous entendez toujours tous les signaux enregistrés
sur le disque.
• Pendant une section à images séquentielles d’un DVD vidéo il
peut falloir 30 secondes pour que le réglage
Audio Out
soit
effectif.
• Certains DVD audio ne permettent pas le mixage en aval des
signaux audio. Ces disques émettent toujours des signaux
audio multicanaux, quel que soit le réglage sélectionné à ce
stade.
Audio 2 > Audio Out
> 2Channel
5.1 Channel
|Audio21 I
Audio PRC-Off
||2 Channel
Speaker Setting 5.1 Channel
Gain Setting - Fix
CD Digital Direct-Off
^^É^Move
I
Exit
E n / F r