8 audio settings / paramètres audio – Pioneer DV-939A User Manual
Page 116
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

8 Audio Settings / Paramètres audio
Set the distance from your main listening position to each speaker in
the Distance screen. The distance setting for any speaker that was set
to
Off
in the Size screen will be grayed out. For the other speakers,
enter the distance to the nearest
0.1 m
(10cm). You can set the
distance for the
L/R
speakers between
0.3m
and
9m.
Note that
you must set the
C
and
SW
speakers within
2 m
of the
L/R
setting.
The
LS
and
RS
speakers must be set within
-6m
and
+2 m
of the
L/R
setting.
The graphic on the right of the screen represents your speaker setup,
with the currently selected speaker’s name highlighted in blue, and
the speakers set to On highlighted in yellow.
Note:
If your subwoofer is placed beyond the adjustment range
(L/R±2m),
set to the nearest setting possible. Surround sound
cohesion should not be affected very much.
L/R (0.3m - 9m)
C (L/R ± 2m)
LS (L/R - 6m - + 2m)
RS (L/R - 6m - + 2m)
SW(L/R±2m)
Réglez la distance entre votre position d’écoute principale et chacun
des haut-parleurs dans l’écran Distance. La sélection de la distance
pour les haut-parleurs réglés sur
Off
dans l’écran Size apparaît en
grisé. Pour les autres haut-parleurs, introduisez une distance de
0,1 m
(10 cm) minimum. Vous pouvez régler la distance pour les
haut-parleurs
L/R
entre
0,3 m
et
9 m.
Remarquez que le réglage
de la distance des haut-parleurs
C
et
SW
ne doit pas différer du
réglage
L/R
de plus de
2 m.
Les haut-parleurs
LS
et
RS
doivent
être réglés entre
-6 m
et
+2 m
du réglage
L/R.
Le graphique à droite de l’écran représente la configuration de vos
haut-parleurs, avec le nom du haut-parleur actuellement sélectionné
mis en évidence en bleu et les haut-parleurs réglés sur On mis en
évidence en jaune.
Remarque:
Si votre haut-parleur d’extrêmes-graves est installé
au-delà de la plage de réglage
(L/R±2m),
réglez-le sur la distance
la plus proche possible. La cohésion du son surround ne devrait pas
s’en trouver trop affectée.
L/R (0.3m - 9m)
C (L/R ± 2m)
LS (L/R - 6m - + 2m)
RS (L/R - 6m - + 2m)
SW(L/R±2m)
E n / F r