KEYENCE IB Series - Manual (Page 95)

4-3 Calibration Function
4-43 IB-E
4
Set
ting V
a
rious
F
unct
ions
Setting Method (Measured Correction)
Main screen
1
Press the [MODE] and  buttons for approx. 2
seconds on the main screen at the same time.
[30.CLb] is displayed on the main display (upper level).
Press the [MODE]
+  buttons for 2
seconds or more
at the same time
2
Press the  /  button to set [MEAS] and press the 
button.
set1
3
Insert workpiece A for which the measured value is
known, and set “R.V. you wish to display (1)” for the
workpiece A using the  /  buttons.
The current internal measurement value is displayed on the
main display (upper level). [set1] and the “R.V. you wish to
display (1)” are alternately displayed on the sub display's
screen (lower level).
4
Press the [SET] button.
After [set1] blinks several times on the sub display's screen
(lower level), [set2] is displayed.
[SET] button
set2
5
Insert workpiece B for which the measured value is
known, and set “R.V. you wish to display (2)” for the
workpiece B using the  /  buttons.
The current internal measurement value is displayed on the main
display (upper level). [set2] and the “R.V. you wish to display (2)”
are alternately displayed on the sub display's screen (lower level).
[SET] button
LASER
BANK 0
1
2
3
HI
GO
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
HOLD CALC CHECK
F'(.6
LASER
BANK 0
1
2
3
HI
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
%.D
GO
HOLD CALC CHECK
Calibration setting
Setting value Description Default value
defLt
No correction (Default setting) 
MEAS
Measured correction
LoGic
Logical correction
LASER
BANK 0
1
2
3
HI
GO
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
HOLD CALC CHECK
Setting you wish to display
R.V.
" 1. Measurement Mode" (page 4-8)
Item
Measurement
mode
Setting range
Default
value
R.V. you
wish to
display (1) % mode - 999.99 to 999.99 0.00
Dimension mode - 99.999 to 99.999 0.000
LASER
BANK 0
1
2
3
HI
GO
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
HOLD CALC CHECK
" 1. Measurement Mode" (page 4-8)
Item
Measurement
mode
Setting range
Default
value
R.V. you
wish to
display (2) % mode - 999.99 to 999.99 100.00
Dimension mode - 99.999 to 99.999 10.000