KEYENCE IB Series - Manual (Page 49)

3-8 Bank Function (Registering Multiple Tolerance Setting Values)
3-21 IB-E
3
B
a
sic O
perat
io
ns
The following two methods can be used to switch the bank. Set the method you wish to use
on the Bank Switching Method setting screen.
• Button operation on the front panel of the amplifier
• External input (Bank A input and Bank B input)*
* If the bank A input and bank B input are set to the external inputs, the bank can be
switched with the external inputs.
"10. External Input" (page 4-29)
Switching the bank with button operations
Press the  /  button while holding down the [MODE] button on the main screen. The
bank will switch, and the corresponding bank indicators [Bank 0] to [Bank 3] will be ON.
How to Switch the Bank
Reference If the  button is pressed while holding down the [MODE] button, the
banks will change in reverse order.
LASER
BANK 0
1
2
3
HI
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
GO
HOLD CALC CHECK
Bank indicator
LASER
BANK 0
1
2
3
HI
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
GO
HOLD CALC CHECK
Bank indicator
LASER
BANK 0
1
2
3
HI
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
GO
HOLD CALC CHECK
Bank indicator
LASER
BANK 0
1
2
3
HI
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
GO
HOLD CALC CHECK
Bank indicator
Press  while holding
down the [MODE] button.
Press  while holding
down the [MODE] button.
Press  while holding
down the [MODE] button.
Press  while holding
down the [MODE] button.
BANK 0 ON
BANK 1 ON
BANK 2 ON
BANK 3 ON