KEYENCE IB Series - Manual (Page 117)

A-9
A
ppendix
IB-E
2
Display Screen and Output
Normally, the judgment value (P.V.) is displayed on the main display (upper level).
This section describes the judgment output and analog output status when displays other
than numbers appear on the main display.
*1 The output mode of judgment output can be set to NO (Normally Open) or NC
(Normally Closed).
"4. Output Mode" (page 4-13)
*2 If [erC] (overcurrent error) returns, all judgment outputs are fixed to OFF.
*3 HI/GO/LO turn on simultaneously when the error output mode is the LX2 compatible
mode.
"17. Error Output Mode" (page 4-39)
*4 HI/GO/LO turn on simultaneously when the error output mode is the LX2 compatible
mode.
"17. Error Output Mode" (page 4-39)
Reference The judgment indicator on the amplifier unit operates in the same way as
Normally Open regardless of the output mode setting.
"3-6 Setting the Tolerance Setting Value" (page 3-13)
Status
Amplifier Control input
Control
output
Analog
output
Uppe
r le
v
el
m
ai
n
d
is
p
la
y
J
udg
m
e
nt
indic
a
tor
*1
T
im
ing /Re
se
t
Ba
nk
s
w
it
ching/
em
is
si
o
n
sto
p
Ze
ro-
shif
t
Adjus
t input
J
udg
m
e
nt
out
put
*1
Vo
lta
g
e
(c
urre
nt
)
va
lu
e
Measuring
Judgment
value
(P.V)
Measurement
results
Yes Yes Yes Yes
Measurement
results
Voltage (current) for
measured value
No
measurement
value
----- All OFF Yes Yes No Yes All OFF
Analog voltage
output: 5.5 V fixed
Analog current
output:3.0 mA fixed
Out of display
range
FFFF
Only HI
lights
Yes Yes No Yes
Only HIGH
output ON
Fixed to upper limit
of analog output
range (For 1-5 V,
fixed to 5 V)
(When upper limit <
lower limit: 1 V)
Out of display
range
-FFFF
Only LO
lights
Yes Yes No Yes
Only LOW
output ON
Fixed to lower limit
of analog output
range (For 1-5 V,
fixed to 1 V)
(When upper limit <
lower limit: 5 V)
Setting
Setting
item
Follows
setting
details
During error:
No
Other than
error:
Yes
Yes
Out of the
measurement
range,
during error:
No
Other than the
above:
Yes
Yes
Follows
setting
details
Follows setting
details
During error
Error
display
HI/LO
simultaneously
light *3
No Yes No No
HIGH/LOW
output
simultaneously
ON *4
Analog voltage
output: 5.5 V fixed
Analog current
output: 3.0 mA fixed
Overcurrent
error
ErC All OFF Yes Yes
Out of the
measurement
range,
during error:
No
Other than the
above:
Yes
Yes All OFF
Voltage (current) for
measured value
EEPROM
error
ErE
Measurement
results
Yes Yes
Out of the
measurement
range,
during error:
No
Other than the
above:
Yes
Yes
Measurement
results
Voltage (current) for
measured value