KEYENCE IB Series - Manual (Page 91)

4-2 Basic Settings and Advanced Settings
4-39 IB-E
4
Set
ting V
a
rious
F
unct
ions
Set the output operation when an error occurs.
* To set the same error output operation as the LX2, set the “LX2 compatible mode”.
17. Error Output Mode
Item Description
Default
value
Normal mode
(Default setting)
• The error output HI, LO is output.
• When the reference light registration and adjust
input are successful, the state will automatically
return to the measurement state. (Applies only for
reference light registration registration error and
adjust error.)

LX2 compatible
mode
*
• The error output HI, GO, LO is output.
• The state does not automatically return to the
measurement state when the reference light is
registered and the adjust is input. (Applies only for
reference light registration error and adjust error.)
Reference The operation is different when the following errors are output.
• Reference light registration error
• Adjust error
• Errros other than [ErE] and [ErC]
" Error Displays and Corrective Actions" (page A-4)
Light insufficient
error
Interfering light error
-
LASER
BANK 0
1
2
3
HI
GO
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
'4) HOLD CALC CHECK
KP(
LASER
BANK 0
1
2
3
HI
GO
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
'4) HOLD CALC CHECK
Light insufficient
error
Excess light error Interfering light error
-
LASER
BANK 0
1
2
3
HI
GO
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
'4#&, HOLD CALC CHECK
QW'T
LASER
BANK 0
1
2
3
HI
GO
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
'4#&, HOLD CALC CHECK
KP(
LASER
BANK 0
1
2
3
HI
GO
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
'4#&, HOLD CALC CHECK