KEYENCE IB Series - Manual (Page 92)

4-2 Basic Settings and Advanced Settings
4-40
4
Set
ting V
a
rious
F
unct
ions
IB-E
The number of digits of the judgment value (P.V.) or the internal measurement value (R.V.)
displayed on the amplifier unit is set.
when [dEFLt] is set, the displayed digits are as follows.
" 1. Measurement Mode" (page 4-8)
When no buttons are pressed for more than one minute, the power saving function is
activated with the amplifier unit.
The power saving function is activated as soon as the setting is complete. The normal
display is restored by pressing any of the buttons.
*1 Only one segment (horizontal bar in the center) on the main
display (upper) flashes, moving in order on the display from
right to left. Also, the sub display indicator turns off.
18. Display Digit
Item Measurement mode Setting Default value
Measurement mode
% mode dEFLt /0.01/0.1/1
dEFLt
Dimension mode dEFLt /0.001/0.01/0.1/1
Measurement mode Setting range
% mode 0.01
Dimension mode
Head models IB-01/IB-05/IB-10
0.001
Head model IB-30
0.01
19. Power Save Function
Power save function Amplifier unit
Default
value
OFF
Normally ON 
Half
Animation display *1
All
All OFF
LASER
BANK 0
1
2
3
HI
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
GO
HOLD CALC CHECK
Moves to left.