Timing input, Delay timer, Timing input -23 7. delay timer -23 – KEYENCE IB Series User Manual
Page 75: E " 6. tim
4-2 Basic Settings and Advanced Settings
4-23
IB-E
4
Set
ting V
a
rious
F
unct
ions
The external input (timing input) operation used for " 5. Hold Function" (page 4-14) is set.
If “Auto peak hold” or “Auto bottom hold” is set, this item is skipped.
" 5. Hold Function" (page 4-14)
The delay timer for the judgment output is set.
There are three judgment outputs as below.
• HIGH judgment output (Black wire)
• GO judgment output (Gray wire)
• LOW judgment output (White wire)
The judgment output is turned ON/OFF according to the tolerance setting value and the
output mode settings.
"3-6 Setting the Tolerance Setting Value" (page 3-13)
" 4. Output Mode" (page 4-13)
* There is no delay timer for the check output.
6. Timing Input
Item
Setting range
Default value
Timing Input
LeVel
(Level), edGe (Edge)
Level
7. Delay Timer
Delay timer
Description
Default
value
Delay timer off
The delay timer is not used.
On delay timer
Time required to change the GO judgment output
operation from OFF to ON is delayed for specified time
set on the timer.
Off delay timer
Time required to change the GO judgment output
operation from ON to OFF is delayed for specified time
set on the timer.
One shot timer
When GO judgment output is turned ON, if the specified
time elapses, GO judgment output is automatically
turned OFF.