KEYENCE IB Series - Manual (Page 89)

4-2 Basic Settings and Advanced Settings
4-37 IB-E
4
Set
ting V
a
rious
F
unct
ions
Set the permitted light adjustment percentage when using the adjust function.
"3-4 Reference Light Registration (Gain Adjustment) and Adjust Function" (page 3-10)
Adjust input is automatically applied when there is no workpiece in the measurement
range.
* The sampling rate will vary depending on the auto adjust function setting.
" 3. Averaging/High-Pass Filter" (page 4-11)
* If the auto adjust function is set to “Enable”, the “auto adjust indicator” on the amplifier
unit will turn on.
14. Adjust Level
Item Setting range
Default
value
Adjust level 1P to 30P 20P
Reference If the adjust level is 20P (20%), the light can be compensated with the
adjust function when the light is within ±20 of the received light registered
for the reference received light.
15. Auto Adjust Function
Setting Description
Default
value
Disabled
Auto adjust function disabled 
Enabled
Auto adjust function enabled
Point
The "auto adjust indicator" flashes while the calibration function is
being set. The auto adjust function is not executed during this time.
"4-3 Calibration Function" (page 4-42)