KEYENCE IB Series - Manual (Page 77)

4-2 Basic Settings and Advanced Settings
4-25 IB-E
4
Set
ting V
a
rious
F
unct
ions
 Off delay timer
Time required to change the GO judgment output operation from ON to OFF is delayed for
specified time set on the timer. Also, time required to change the HIGH judgment output
and LOW judgment output operations from OFF to ON is delayed.
 One shot timer
When the GO judgment output is turned ON, if the specified time set on the timer elapses,
the GO judgment output is forcibly turned OFF. The HIGH judgment output and the LOW
judgment output are not turned ON.
* Even if a judgment other than GO is made while the Timer duration is elapsing, the GO
output will not turn OFF until the Timer duration has elapsed.
Timer setting screen
When the timer settings other than the Delay timers off are set, the display goes to the
timer setting screen. (When the Delay timer off is set, this screen is skipped.)
Press the  /  button on the timer setting screen to specify the timer.
Time
Timer duration
Judgment value (P.V.)
HIGH setting value
LOW setting value
ON
OFF
ON
OFF
ON
OFF
HIGH judgment output
GO judgment output
LOW judgment output
Time
Judgment value (P.V.)
HIGH setting value
LOW setting value
ON
OFF
ON
OFF
ON
OFF
HIGH judgment output
GO judgment output
LOW judgment output
Timer duration*
Item Setting range Default value
Timer value 1 to 9999 (ms) 60
QP&
LASER
BANK 0
1
2
3
HI
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
&.;
GO
HOLD CALC CHECK
LASER
BANK 0
1
2
3
HI
GO
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
&.;6 HOLD CALC CHECK
LASER
BANK 0
1
2
3
HI
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
*;5
GO
HOLD CALC CHECK
7. Delay timer Timer setting screen 8. Hysteresis
[MODE]
or  [MODE]
or 