KEYENCE IB Series - Manual (Page 23)

2-1 Mounting and Wiring the Sensor Amplifier Unit
2-7 IB-E
2
Inst
all
at
ion and
Connec
tion
Power/Input-output cable
"Output Circuit" (page 5-4)
*1 IB-1050/IB-1550 (expansion units) do not have brown, blue or light blue wires. Power
is supplied to the expansion units through IB-1000/IB-1500 (main unit).
*2 The analog output can be set to any of the following options either “when the power is
turned on for the first time” or “when performing the initial reset”.
• Not used (OFF)
• 0 to 5 V
• -5 to 5 V
• 1 to 5 V
• 4 to 20 mA
"3-1 Operation when the Power is Turned On for the First Time" (page 3-2)
"3-5 Initial Reset (Initialize)" (page 3-12)
*3 The external input can be selected among the following in addition to the above.
• Bank A input
• Bank B input
• Laser emission stop input
• Not used (OFF)
Adjust input can be selected only for the external input 4.
"10. External Input" (page 4-29)
Brown
Blue
Black
White
Gray
Light blue Orange
Shield
Pink
Yellow
Pink/Purple
Purple
Green
10 to 30 VDC
0 V
HIGH judgment output
LOW judgment output
GO judgment output
Analog output +
Analog output GND
External input 1 (Zero shift input)
External input 2 (Reset input)
External input 3 (Timing input)
External input 4 (Not used)
Check output
*1
*1
*1
*2
*2
*3
*3
*3
*3