Timing chart – KEYENCE IB Series User Manual
Page 76
4-2 Basic Settings and Advanced Settings
4-24
4
Set
ting V
a
rious
F
unct
ions
IB-E
Timing chart
Delay timer off
The delay timer is not used.
On delay timer
Time required to change the GO judgment output operation from OFF to ON is delayed for
specified time set on the timer. Also, time required to change the HIGH judgment output
and LOW judgment output operations from ON to OFF is delayed.
Reference
• The following are the timing charts when the output mode of judgment
output is Normally Open (default value). ON/OFF is reversed for Normally
Closed.
• The hysteresis is not taken into account in the following timing charts.
Note that the hysteresis affects the ON/OFF timing of the actual judgment
output.
Time
Judgment value (P.V.)
HIGH setting value
LOW setting value
ON
OFF
ON
OFF
ON
OFF
HIGH judgment output
GO judgment output
LOW judgment output
Time
Timer value
Judgment value (P.V.)
HIGH setting value
LOW setting value
ON
OFF
ON
OFF
ON
OFF
HIGH judgment output
GO judgment output
LOW judgment output