KEYENCE IB Series - Manual (Page 101)

5-1 Specifications
5-3 IB-E
5
S
pec
ificat
ions
*1 ± 5 V, 1 to 5 V, 0 to 5 V, or 4 - 20 mA should be selected.
*2 The four external input wires are assigned with desired inputs.
Rated no-voltage input: ON voltage 2 V or less, OFF current 0.05 mA or less
Rated voltage input: Max. input rating 30 V or less, ON voltage 7.5 V or more,
OFF current 0.05 mA or less
*3 Rated NPN open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are
connected), 30 V or less, residual voltage 1 V or less
Rated PNP open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are
connected), power voltage or less, residual voltage 2 V or less
*4 The power consumption with expansion units installed is the total of each amplifier unit's power
consumption.
Example: When using one master unit (IB-1000) with two expansion units (IB-1050)
(1950 mW x 1) + (1950 mW x 2) = 5850 mW
Amplifier Unit
Model IB-1000 IB-1500 IB-1050 IB-1550
Amplifier type DIN rail mount Panel mount DIN rail mount Panel mount
Main unit/Expansion unit Main unit Expansion unit
Head compatibility Yes
Display
Display resolution 0.01%, 0.1%, 1% (switchable)
Display range
–99.999 to 99.999, –99.99 to 99.99
–99.9 to 99.9, –99 to 99 (switchable)
Digital display method
Dual 7-
segment
display
Upper level:
5 red digits
Lower level:
5 green
digits
Dual 7-
segment
display
Upper level:
2-color
(green/red)
5 digits
Lower level:
5 green
digits
Dual 7-
segment
display
Upper level:
5 red digits
Lower level:
5 green
digits
Dual 7-
segment
display
Upper level:
2-color
(green/red)
5 digits
Lower level:
5 green
digits
Operating indicators
Judgment indicator: 2-color (green/red) LED (HI, GO, LO)
Bank indicator: Green LED x 4
Laser emission warning indicator: Green LED
Others: Green LED x 8, red LED x 3
Analog voltage output *1
±5 V, 1 to 5 V, 0 to 5 V
Output impedance 100 Ω
No
Analog current output *1
4 to 20 mA Maximum load
resistance 350 Ω
Control
input *2
Bank switching input
Non-voltage input
Zero shift input
Laser emission stop input
Timing input
Reset input
Adjust input
Control
output *3
Judgment output Open collector
(NPN/PNP switchable, NO/NC switchable) Check output
Power
supply
Power voltage
10 to 30 VDC, including ripple
(P-P) 10%
Class 2 or LPS
Supplied from main unit
Power
consumption*
4
1950 mW or
less (at 30 V,
65 mA max.)
2100 mW or
less (at 30 V,
70 mA max.)
1950 mW or
less (at 30 V,
65 mA max.)
2100 mW or
less (at 30 V,
70 mA max.)
Environmental
resistance
Operating ambient
temperature
-10 to +50 °C (No freezing)
Operating ambient
humidity
35 to 85% RH (No condensation)
Vibration resistance
10 to 55 Hz, compound amplitude 1.5 mm,
2 hours each for X, Y, Z axes
Pollution degree 2
Materials
Main unit case/Front panel: polycarbonate,
keytop: polyacetal, cable: PVC
Mass (including accessories) Approx. 150 g Approx. 170 g Approx. 140 g Approx. 165 g