KEYENCE IB Series - Manual (Page 15)

1-2 Part Names and Functions
1-7
1
Bef
o
re U
se
IB-E
(6) Zero shift button
Press this to set the internal measurement value (R.V.) to the
shift target value.
"3-7 Zero Shift Function (Shifting the Internal Measurement
Value (R.V.))" (page 3-18)
(7) Sub display
identification indicator
Turns on according to the type of value displayed on the sub
display.
(8) Sub display
Displays the internal measurement value (R.V.), analog output
value and various settings (selections).
(9) Timing input indicator
If the timing input (external input) is set to level, this indicator
lights while the timing input is on. If the timing input is set to
edge, this indicator turns on for approx. 0.5 seconds when the
timing input is on.
(10) Zero shift indicator Turns on for approx. 0.5 seconds when zero shift is executed.
(11) SET button
When making various settings, press this button to
automatically set the setting value.
(12) MODE button
When making various settings, press this button to start or end
the setting or to move the item.
(13) Arrow buttons
Use this to select the setting item or to change the details
displayed on the sub display.
(14) Check indicator
Turns on when the check output is on.
" 16. Check Output Function" (page 4-38)
(15) Percentage indicator
Turns on when the measurement mode is % mode.
" 1. Measurement Mode" (page 4-8)
(16) Hold indicator
Turns on when the judgment value (P.V.) is held.
" 5. Hold Function" (page 4-14)
Item Description