KEYENCE IB Series - Manual (Page 55)

4-1 Setting Operations
4-3 IB-E
4
Set
ting V
a
rious
F
unct
ions
Functions available on the setting screen
Main screen
Press the [MODE] button for approx. 2 seconds.
4-2 Basic Settings and Advanced Settings (page 4-4)
Basic settings
Basic settings, such as measurement mode and averaging,
are made.
Advanced settings
More advanced settings such as hold function, delay timer
enable the unit to be used in wider applications.
Press the [MODE] and  buttons for approx. 2 seconds.
4-3 Calibration Function (page 4-42)
When there is a difference between the internal
measurement value (R.V.) or calculated value (CALC value)
and the actual dimension of the object, the value can be
calibrated.
While pressing the [MODE] button, press the [SET] button
5 times.
3-5 Initial Reset (Initialize) (page 3-12)
All settings, excluding the calibration function, are initialized.
Press the  and  buttons for approx. 2 seconds.
3-3 Beam Axis Adjustment (page 3-8)
This function assists adjusting the laser beam’s axis.
LASER
BANK 0
1
2
3
HI
GO
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
HOLD CALC CHECK