Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 70)

70 3. Using System 500 without a Terminal Technical Reference Manual-4.0.0en
The SR510, 520 and 530 receivers
can be used without the TR500
attached.
Applications and set ups most suited
to this type of configuration are
Reference Stations for Post-Process-
ing and Real-Time and Static/Rapid
Static measurements.
The receiver can be programmed in
the office using the TR500. This
greatly reduces the knowledge
required to operate the instrument in
the field.
Full instructions on how to program
the receiver are given in Chapter 5.
3. Using System 500 without a Terminal