Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 147)

147
5. Configuring the Receiver Technical Reference Manual-4.0.0en
East Pos - Sets the position of the
easting.
North Pos - Sets the position of the
northing.
Height Pos - Sets the position of the
height.
An example of what is selected is
displayed. Use the DEFLT (F5) key to
reset the format to its original values.
Define the delimiter used to separate
the information for each point and
then define the position of each
component of each point. An example
of what you have defined is given at
the bottom of the screen.
Press CONT (F1) to return to the
CONFIGURE\Stakeout screen and
CONT (F1) again to complete the
configuration.