Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 282)

282 11. Applications Technical Reference Manual-4.0.0en
In COORDSYS\ Parameters press
CONT (F1) to proceed.
An overview of the Coordinate
System is given.
Coord Sys - The Coordinate System
name.
Trans Type - The type of
transformation used.
Residuals - The method by which
residuals will be distributed
throughout the transformation area is
displayed.
This may help the transformation
result be more realistic and help
disperse any strains in the
transformation. 1/Dist, 1/Dist 2 and 1/
Dist 3/2 distributes the residuals of the
control points according to the
distance between each control point
and the newly transformed point.
Multiquadratic distributes the
residuals using a multiquadratic
interpolation approach.
The method of distribution is stored
with the new coordinate system.
#Match Pts - The number of
matched points used in the
transformation calculation.
Max Res E, N, H - The largest
residual in East, North and Height.
Press CONT (F1) to save the
Coordinate System and return to the
Application menu.