Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 311)

311 13. Transfer Technical Reference Manual-4.0.0en
Enables you to transfer Coordinate
Systems between Sensors and PC
Cards.
Select From where you wish to
transfer the Coordinate System. The
device To which the Coordinate
System will be transferred will be
automatically selected.
Coord Sys - Select the Coordinate
System to be transferred. Press ALL
(F3) to select all the Coordinate
Systems.
13.3 Coordinate System 13.4 Antenna Info
Enables you to transfer Antenna Info
Records between Sensors and PC
Cards.
Select From where you wish to
transfer the Antenna Info Record. The
device To which the Antenna Info
Record will be transferred will be
automatically selected.
Antenna - Select the Antenna Info
Record. Press ALL (F3) to select all
the Antenna Info Records.
13.5 Codelist
Enables you to transfer Codelists
between Sensors and PC Cards.
Select From where you wish to
transfer the Codelist. The device To
which the Codelist will be transferred
will be automatically selected.
Codelist - Select the Codelist. Press
ALL (F3) to select all the Codelists.