Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 57)

57
2. Set-up and Connection Technical Reference Manual-4.0.0en
The Next Steps
If the Receiver has been pre-pro-
grammed and the TR500 is being
used, further guidance is available in
Chapter 7.
If the Receiver requires programming
with the TR500, further guidance is
available in Chapter 5.
Ensure a dry plastic
weather protection cap is
fitted to the socket on the TR500 that
is not connected to the sensor.
If moisture or water should
appear in the socket that is
not used on the TR500, allow the
socket and plastic weather protection
cap to dry naturally.
Advice on using the
Minipack is given in Section
2.14.