Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 323)

323 Appendix C Technical Reference Manual-4.0.0en
Appendix C - Seismic Record Format
Seismic records may be generated and saved along with
the point information. They take the following format:
@,GSE,V,M,gg.g,pp.p,hh.h,vv.v,aaa.aaa,ss,eee,ii,REC,RSN
Example
@GSE12 4.0 0.0 0.0 0.0 1.220 5 1 2SR530 001899
Record Content
@
GSE
Version
M
gg.g
pp.p
hh.h
vv.v
aaa.aaa
ss
eee
ii
REC
RSN
Description
Record Flag. @ = Automatically stored (not user
entered).
Record Type. GSE = GPS SEismic.
Version number of this record.
Position type. Range 0,1,2,3,4. Default if none
available - 0
0 - position not available
1 - navigated position
2 - differential code position
3 - differential phase, float solution
4 - differential phase, fixed solution
GDOP value. Range 0.0 to 99.9. Default if not
available - 0.0.
PDOP value. Range 0.0 to 99.9. Default if not
available - 0.0.
HDOP value. Range 0.0 to 99.9. Default if not
available - 0.0.
VDOP value. Range 0.0 to 99.9. Default if not
available - 0.0.
Antenna Height - sum of instrument height and
antenna offset. Range -99.9 to 999.99. Default if not
available - 0.0.
Number of satellites used for solution. Range 0 to 12.
Default if not available - 0.
Number of epochs spent on point. Range 0 to 999.
Default if not available - 0. Default if not available-0.
Length of interval between epochs (seconds). Range
0, 1, 2, 3, 4, 5, 6, 10, 12, 15, 30, 60. Default if not
available - 0.
Receiver type. Range SR299, SR399, SR299E,
SR399E, SR9400, SR9500, SR510, SR520, SR530,
GS50
Receiver serial number. Range 0 - 999999. Value if
unavailable - 0.