Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 357)

357 Appendix H Technical Reference Manual-4.0.0en
SMARTgate is a device which has
GSM and Radio as well as the
functionality of the SAPOS-Box
integrated (see www.navsys.de). The
device is connected to the sensor in
the Leica radio housing.
To operate this device special user-
profiles have to be transferred to the
SMARTgate box. Such a user-profile
contains information on the kind of
communication, the service em-
ployed, the account used, a list of
reference stations, an acceptable
minimum distance etc.
The parameters of the user-profiles
are neither deletable or editable nor
may they be copied to the sensor.
You may select from differently
configured profiles on the sensor,
though.
Configuration
In the CONFIGURE\ Interfaces panel
highlight Real-Time and press EDIT
(F3).
Set R-Time Data to Rover and set
the Data Format to either RTCM 1,2
or RTCM 20,21.
Press DEVCE (F5) to access the
device list. Select SMARTgate and
press CONT (F1).
Press CONT (F1) to return to the
CONFIGURE\ Interfaces panel.
Press CTRL (F5) to access the
CONFIGURE\ SMARTgate panel.
Profile - Select one of the User
Profiles stored in the SMARTgate
box.
Profile No - Displays the number of
the selected profile.
Using a SMARTgate box