beautypg.com

Bio-Rad ChromLab™ Software User Manual

Page 90

background image

4

| Installing ChromLab Software

88

| NGC Chromatography Systems and ChromLab Software

On the ChromLab Computer

1.

Start ChromLab.

The System Connection dialog box appears. ChromLab detects the NGC

systems available on the same sub-network or those systems that are directly

connected to the computer. The system name, network name, and IP address

of each available system appear in the table.

Note:

If your system does not appear in the table, click Detect to refresh

the list. ChromLab searches the network for available NGC systems and

refreshes the list.

2.

In the System Connection dialog box, do one of the following:

Select a name in the list of detected systems and click Connect.

Select the appropriate radio button, enter the system’s name or IP address

and click Connect.

Tip:

This is the information that you noted on ChromLab Touch in

step

2 on page

87. The IP address for an NGC instrument that is

directly connected to the ChromLab computer begins with the number

sequence 169.254.