beautypg.com

Bio-Rad ChromLab™ Software User Manual

Page 107

background image

Plumbing NGC Systems

Installation Guide

| 105

Attaching the Backpressure Regulator

If your column requires a high backpressure, install the backpressure regulator.

To attach the backpressure regulator

1.

Connect Tube #2 to the top of the conductivity monitor.

2.

Connect the other end of Tube #2 to a 40 psi backpressure regulator.

Note:

The backpressure regulator has a raised arrow on its side. Ensure

that the arrow on the regulator points in the direction of the flow.