Bio-Rad ChromLab™ Software - Manual (Page 13)

Regulatory Information
Installation Guide | 11
FCC Warning and Notes
The NGC instrument complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
It is possible that emissions from the NGC instrument may interfere with some
sensitive appliances when placed nearby or on the same circuit as those
appliances. The user should be aware of this potential and take appropriate
measures to avoid interference.
The NGC instrument should not be modified or altered in any way. Alteration of the
NGC instrument will:
 Void the manufacturer’s warranty
 Void the IEC/EN/UL/CSA 61010-1 safety compliance
 Create a potential safety hazard
Bio-Rad Laboratories is not responsible for any injury or damage caused by the use
of this instrument for purposes other than those for which it is intended, or by
modifications of the instrument not performed by Bio-Rad Laboratories or an
authorized agent.
Important: The NGC instrument is intended for laboratory use only.
We strongly recommend that you follow the safety specifications listed throughout
this manual. Use only the supplied power cord with the instrument, making sure to
choose the plug adaptor that corresponds to the electrical outlets in your region.