Bio-Rad ChromLab™ Software - Manual (Page 78)

3 | Setting Up NGC Chromatography Systems
76 | NGC Chromatography Systems and ChromLab Software
Connecting the Power and Communication Cables
The power sockets and communication ports for the NGC system are located on
the back of the instrument. Because the back of the instrument will be very close to
the back of the standard cold cabinet, it is recommended that you connect the
power and communication cables before lifting the instrument into the cabinet.
Note: The Cat 6 ethernet cable to connect the NGC instrument to the
computer running ChromLab™ software is approximately 10' (3.0 m) in length.
L EGEND
1 Power on/off switch 2 Fuse cover
3 Power inlet port 4 Power outlet ports
5 Ethernet connection port 6 Touch screen connection port