Bio-Rad ChromLab™ Software - Manual (Page 88)

4 | Installing ChromLab Software
86 | NGC Chromatography Systems and ChromLab Software
Setting the System Name
The tasks in this section are performed on both the ChromLab computer and the
NGC instrument’s touch screen.
On the NGC system
1. When ChromLab Touch loads on the touch screen, you are prompted to
provide a name for the NGC instrument. By default, the name is NGC.
This is the name that appears on the ChromLab Home screen when it connects
to the NGC system. This is also the name that appears on the run reports to
identify the system on which the run was generated.
You can use any alphanumeric or special characters. However, you are limited
to a maximum of ten characters.