Bio-Rad ChromLab™ Software - Manual (Page 100)

5 | Plumbing and Priming the NGC Chromatography Systems
98 | NGC Chromatography Systems and ChromLab Software
Preparing the Buffer and Waste Bottles
Before you plumb and prime the NGC instrument, prepare buffer and waste bottles.
Buffer Bottles
Place buffer bottles on the bench next to the instrument, or in the buffer tray on top
of the instrument. The tray can accommodate up to six 1 L bottles.
Waste Bottles
Place the waste bottles on top of the bench or on the floor below the instrument.
Ensure that the waste containers are large enough to hold all buffer that will flow into
them. Empty the waste bottles regularly.
Important: Do not place waste bottles on top of the instrument.