Rockwell Automation 1734-AENTR EtherNet/IP Network Configuration User Manual User Manual
Page 71

Rockwell Automation Publication ENET-UM001L-EN-P - March 2014
71
Interlocking and Data Transfer between Controllers Chapter 6
2. In the Controller Tags window, right-click the tag that will consume the
data and choose Edit Tag Properties.
The Tag Properties dialog box appears.
3. From the Type pull-down menu, choose Consumed.
4. In the Data Type field, type a data type that matches the type assigned to
the produced tag.
5. Click Connection.
The Consumed Tag Connection dialog box appears.
6. From the Producer pull-down menu, choose the controller that produces
the data.
This manual is related to the following products:
- 1734-AENT EtherNet/IP Network Configuration User Manual 22-COMM-E EtherNet/IP Network Configuration User Manual 20-COMM-E EtherNet/IP Network Configuration User Manual 1794-AENT EtherNet/IP Network Configuration User Manual 1783-Etxx EtherNet/IP Network Configuration User Manual 1769-Lxxx EtherNet/IP Network Configuration User Manual 1756-Enxx EtherNet/IP Network Configuration User Manual