Rockwell Automation 1734-AENTR EtherNet/IP Network Configuration User Manual User Manual
Page 39

Rockwell Automation Publication ENET-UM001L-EN-P - March 2014
39
Configure a Supervisor on a Device-level Ring Network Chapter 4
3. Complete the rest of the module configuration in your RSLogix 5000
software project.
The graphic below shows the I/O configuration for an example DLR
network.
4. Download to your Logix controller.
5. Go online with the controller and leave it in Program mode.
This manual is related to the following products:
- 1734-AENT EtherNet/IP Network Configuration User Manual 22-COMM-E EtherNet/IP Network Configuration User Manual 20-COMM-E EtherNet/IP Network Configuration User Manual 1794-AENT EtherNet/IP Network Configuration User Manual 1783-Etxx EtherNet/IP Network Configuration User Manual 1769-Lxxx EtherNet/IP Network Configuration User Manual 1756-Enxx EtherNet/IP Network Configuration User Manual