Rockwell Automation 1734-AENTR EtherNet/IP Network Configuration User Manual - Manual (Page 147)

Rockwell Automation Publication ENET-UM001L-EN-P - March 2014 147
Index
A
access distributed I/O modules 59 , 60
add distributed I/O modules
overview 48 , 51
selecting a remote adapter 57
with Studio 5000 environment 60
B
BOOTP/DHCP server
setting IP network address 21 - 23
C
communication driver 14 - 15
communication format 52 , 57
direct connections 54
ownership 56 , 57
rack-optimized connections 55
configure
DHCP server 23
EtherNet/IP modules 17 - 32
MSG instructions 94
personal computer 13 - 15
RSLinx software 25 - 27
Studio 5000 environment 28
connections
data transfer 74
I/O 52
interlocking 64
messaging 74
produced and consumed tags 64
to PanelView terminals 100
to RSView applications 106
troubleshooting 126
consume tags 64 , 68 , 72
control application 32
control I/O
adding distributed I/O modules 48 , 51
communication format 52 , 57
connections 52
hardware 47
ownership 56
RPI 58
control system 11
controller ownership 56
convert between INTs and DINTs 83
D
data transfer
configuring 79 , 82
connections 74
guidelines 73
logic 75
mapping tags 84
overview 61 , 86
to PLC-5 or SLCcontrollers 83
device-level ring network 33 - 46
supervisor node 34 - 35
DHCP server 23
diagnostics
Ethernet statistics 115 , 118
monitor 107
overview 108 , 110 , 111 , 112 , 113 , 116
direct connection 52
DNS addressing 31 - 32
domain name 18
download 32
driver 14 - 15
duplicate address detection 29 - 30
E
email
MSG instruction 94
overview 87
send through an EtherNet/IP module 87 - 97
sending via MSG instruction 89 - 95
status codes 96
text format 96
EtherNet/IP modules
configuring 17 - 32
control application 32
overview 11
set IP network address 18
using in control system 11
G
gateway 17
H
host name 18
I
I/O
controlling over EtherNet/IP 47
interlocking
connections 64
consume tags 68 , 72
organize tags 63
overview 61 , 86
produce tags 66 , 67
terminology 64
IP addresses
definition 17
DHCP server 23
duplicate address detection 29 - 30
RSLinx software 25 - 27
set 18
Studio 5000 environment 28
swapping in redundant systems 30