Rockwell Automation 1734-AENTR EtherNet/IP Network Configuration User Manual User Manual
Page 102
102
Rockwell Automation Publication ENET-UM001L-EN-P - March 2014
Chapter 8 Communicate with PanelView Terminals
2. Click the By Category tab.
3. Choose your EtherNet/IP communication module and click OK.
Depending on the EtherNet/IP communication module, the Select Major
Revision dialog box may appear. If the dialog box appears, choose the
module’s major revision and click OK.
The New Module dialog box appears.
This manual is related to the following products:
- 1734-AENT EtherNet/IP Network Configuration User Manual 22-COMM-E EtherNet/IP Network Configuration User Manual 20-COMM-E EtherNet/IP Network Configuration User Manual 1794-AENT EtherNet/IP Network Configuration User Manual 1783-Etxx EtherNet/IP Network Configuration User Manual 1769-Lxxx EtherNet/IP Network Configuration User Manual 1756-Enxx EtherNet/IP Network Configuration User Manual