Rockwell Automation 1734-AENTR EtherNet/IP Network Configuration User Manual - Manual (Page 106)

106 Rockwell Automation Publication ENET-UM001L-EN-P - March 2014
Chapter 8 Communicate with PanelView Terminals
Connections to
FactoryTalk View
Applications To establish communication to a FactoryTalk View application, configure
RSLinx software to collect tags from the controller. A FactoryTalk View or
FactoryTalk View Enterprise application uses RSLinx software as a data server.
RSLinx Enterprise software defaults to four read connections and one write
connection per configured controller. Modify the RSLinx software configuration
as needed.