Rockwell Automation 1734-AENTR EtherNet/IP Network Configuration User Manual - Manual (Page 62)

62 Rockwell Automation Publication ENET-UM001L-EN-P - March 2014
Chapter 6 Interlocking and Data Transfer between Controllers
Set Up the Hardware In this example, the controller in the local chassis produces a tag that the
Logix5000 controller in the remote chassis consumes. The local controller can
also send a MSG instruction to the remote controller.
Figure 7 - Sharing Data and Transferring Messages
Logix5000 Controller Combinations
Your controller type determines which communication module to use.
Local Chassis with Logix5000
Controller and EtherNet/IP
Communication Module Remote Chassis with Logix5000
Controller and EtherNet/IP
Communication Module
Data
EtherNet/IP Switch
Workstation
Table 9 - Choosing a Communication Module
Controllers Communication Modules
ControlLogix • 1756-ENBT
• 1756-EN2F
• 1756-EN2T
• 1756-EN2TR
• 1756-EN2TXT
• 1756-EN3TR
• 1756-EN2TRXT
• 1756-EN2TSC
1768 CompactLogix 1768-ENBT communication module
1769-L1x CompactLogix Controllers Built-in EtherNet/IP port
• 1769-L30ER
• 1769-L30ER-NSE
• 1769-L30ERM
• 1769-L33ER
• 1769-L33ERM
• 1769-L36ERM
• 1769-L24ER-QB1B
• 1769-L24ER-QBFC1B
• 1769-L27ERM-QBFC1B
• 1769-L16ER-BB1B
• 1769-L18ER-BB1B
• 1769-L18ERM-BB1B Built-in EtherNet/IP port