Appendix b, Proline t-mass 65 thermal flowmeter, Appendix – Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual User Manual
Page 89

Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014
89
Appendix
B
Proline t-mass 65 Thermal Flowmeter
The Proline t-mass thermal flowmeter provides direct measurement of gas mass
flow and temperature as an output.
The t-mass sensor offers the following:
• Negligible pressure drop or loss.
• Wide turndown of up to 100:1.
• Insertion version can be programmed for circular pipe or rectangular
ducting installation.
• Each device individually calibrated and delivered with a traceable
certificate.
• Can be calibrated with flow conditioner on request.
• Optional cold tap device for insertion allowing ease of removal/
replacement for low pressure and non-toxic gas applications.
Topic
Page
Connect a Proline t-mass 65 Flowmeter
Configure a Proline t-mass 65 Flowmeter
Component
Catalog Number
Details
Proline t-mass 65 thermal mass flowmeter
65I-20AA0AD1A1BABA
Firmware revision 1.00
- 1734sc-IE2CH E+H Instruments via HART to PlantPAx User Manual 1769sc-IF4IH E+H Instruments via HART to PlantPAx User Manual 1794-IF8IH E+H Instruments via HART to PlantPAx User Manual 1756-IF16H E+H Instruments via HART to PlantPAx User Manual 1756-IF8IH E+H Instruments via HART to PlantPAx User Manual 1756-IF8H E+H Instruments via HART to PlantPAx User Manual