Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual User Manual
Page 27

Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014
27
Configure the HART Device in RSLogix 5000 Programming Software
Chapter 2
If HART data is not present, make sure the HART function is enabled.
Configure a HART Input
Module in a Compact I/O
System
Use RSWHO Active in RSLogix 5000 software to verify that the controller,
HART input module, and devices are active.
This example has a 1769-L35E CompactLogix controller and the Spectrum
1769sc-IF4IH module and uses the Spectrum sample ACD file.
This manual is related to the following products:
- 1734sc-IE2CH E+H Instruments via HART to PlantPAx User Manual 1769sc-IF4IH E+H Instruments via HART to PlantPAx User Manual 1794-IF8IH E+H Instruments via HART to PlantPAx User Manual 1756-IF16H E+H Instruments via HART to PlantPAx User Manual 1756-IF8IH E+H Instruments via HART to PlantPAx User Manual 1756-IF8H E+H Instruments via HART to PlantPAx User Manual