Chapter 1, Installation, Connect a 2-wire field instrument – Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual User Manual
Page 13: Chapter

Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014
13
Chapter
1
Installation
Connect a 2-Wire Field
Instrument
HART communication is active only with current inputs. Connect a 2-wire field
instrument to any channel of the HART input module in a 2-wire configuration
for current input.
HART devices that support 2-wire connections include the following.
Topic
Page
Connect a 2-Wire Field Instrument
Connect a 4-Wire Field Instrument
Device
See appendix
Prowirl 73 flowmeter
on
Levelflex M guided level-radar
Micropilot M level-radar
Prosonic M ultrasonic level
Liquiline M CM42 transmitter
on
Cerabar S pressure transmitter
on
Deltabar S differential pressure
iTEMP TMT162 temperature transmitter
iTEMP TMT182 temperature transmitter
This manual is related to the following products:
- 1734sc-IE2CH E+H Instruments via HART to PlantPAx User Manual 1769sc-IF4IH E+H Instruments via HART to PlantPAx User Manual 1794-IF8IH E+H Instruments via HART to PlantPAx User Manual 1756-IF16H E+H Instruments via HART to PlantPAx User Manual 1756-IF8IH E+H Instruments via HART to PlantPAx User Manual 1756-IF8H E+H Instruments via HART to PlantPAx User Manual