Additional functions – Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual User Manual
Page 58
58
Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014
Chapter 4
Configure the HART Device in E+H Fieldcare Software
Additional Functions
You can use FieldCare software to perform these additional functions:
• Toggle between connected and disconnected modes
• Read from device
• Write to device
• Device-specific functions
This manual is related to the following products:
- 1734sc-IE2CH E+H Instruments via HART to PlantPAx User Manual 1769sc-IF4IH E+H Instruments via HART to PlantPAx User Manual 1794-IF8IH E+H Instruments via HART to PlantPAx User Manual 1756-IF16H E+H Instruments via HART to PlantPAx User Manual 1756-IF8IH E+H Instruments via HART to PlantPAx User Manual 1756-IF8H E+H Instruments via HART to PlantPAx User Manual