Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual User Manual
Page 38

38
Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014
Chapter 3
Configure the HART Device in FactoryTalk AssetCentre Software
The tree should look like the following screen.
4. Select the chassis and click Add DTM
The following screen should appear.
5. Browse to the backplane containing the appropriate controller. and click
OK.
This manual is related to the following products:
- 1734sc-IE2CH E+H Instruments via HART to PlantPAx User Manual 1769sc-IF4IH E+H Instruments via HART to PlantPAx User Manual 1794-IF8IH E+H Instruments via HART to PlantPAx User Manual 1756-IF16H E+H Instruments via HART to PlantPAx User Manual 1756-IF8IH E+H Instruments via HART to PlantPAx User Manual 1756-IF8H E+H Instruments via HART to PlantPAx User Manual