Appendix h, Cerabar s pressure transmitter, Appendix – Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual User Manual
Page 119

Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014
119
Appendix
H
Cerabar S Pressure Transmitter
The Cerabar S pressure transmitter is used for the following measuring tasks:
• Absolute pressure and gauge pressure in gases, steams or liquids in all areas
of process engineering and process measurement technology
• Level, volume or mass measurement in liquids
• High process temperature
– without diaphragm seals up to 150°C (302°F)
– with typical diaphragm seals up to 400°C (752°F)
• High pressure up to 700 bar
• International usage thanks to a wide range of approvals
Benefits include:
• High reference accuracy: up to ±0.075%, as PLATINUM
version: ±0.05%
• Turn down 100:1, higher on request
• Used for process pressure monitoring up to SIL3, certified according to
IEC 61508 by TÜV SÜD
• HistoROM®/M-DAT memory module
• Continuous modularity for differential pressure, hydrostatic and pressure
(Deltabar S – Deltapilot S – Cerabar S), e.g.:
– replaceable display
– universal electronics
• Extensive diagnostic functions
• Device versions in conformity with ASME-BPE
Topic
Page
Connect a Cerabar S Pressure Transmitter
Configure a Cerabar S Pressure Transmitter
Component
Catalog Number
Details
Cerabar S pressure transmitter
PMC71-AAC2K6RAANA
Firmware revision 2.10
- 1734sc-IE2CH E+H Instruments via HART to PlantPAx User Manual 1769sc-IF4IH E+H Instruments via HART to PlantPAx User Manual 1794-IF8IH E+H Instruments via HART to PlantPAx User Manual 1756-IF16H E+H Instruments via HART to PlantPAx User Manual 1756-IF8IH E+H Instruments via HART to PlantPAx User Manual 1756-IF8H E+H Instruments via HART to PlantPAx User Manual