Supply and signal circuit, Sensor connection: ph / orp – Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual User Manual
Page 151

Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014
151
Liquiline M CM42 Transmitter
Appendix M
Supply and Signal Circuit
For safe communication via the HART protocol and for compliance with the
NAMUR NE 21, use a 2-wire cable shielded on each end. The second current
output is an option.
Following are figures of the view in device (CPU module) (left) and the wiring
diagram (right).
Sensor Connection: pH / ORP
Following are figures of the glass electrodes with PML (symmetrical) view in
device (CPU module) (left) and wiring diagram (right).
BK
BN
GN
WH
YE
CPK9
318
320
112
113
111
317
CM42
319
316
315
J
PM
Ref
pH
Sensor
CPK1
This manual is related to the following products:
- 1734sc-IE2CH E+H Instruments via HART to PlantPAx User Manual 1769sc-IF4IH E+H Instruments via HART to PlantPAx User Manual 1794-IF8IH E+H Instruments via HART to PlantPAx User Manual 1756-IF16H E+H Instruments via HART to PlantPAx User Manual 1756-IF8IH E+H Instruments via HART to PlantPAx User Manual 1756-IF8H E+H Instruments via HART to PlantPAx User Manual