Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual - Manual (Page 35)

Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014 35
Chapter
3
Configure the HART Device in FactoryTalk
AssetCentre Software
FactoryTalk AssetCentre Software is a FDT-based, plant asset management
software tool that you use to configure intelligent field instruments for
Endress+Hauser.
Update the DTM Catalog
1. Launch AssetCentre software and open a project.
2. Choose Tools > DTM catalog to update the available DTMs.
Topic Page
Update the DTM Catalog 35
Configure the DTM Network Path 36
Configure a HART Device 44
Configure a FLEX I/O Module 50
IMPORTANT Before beginning this process, make sure the DTMs and EDSs have been
downloaded from the vendor websites, imported, and installed.