Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual User Manual
Page 39

Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014
39
Configure the HART Device in FactoryTalk AssetCentre Software
Chapter 3
6. Click Select path to autobrowse.
For some I/O it may be necessary to click Open to configure the path.
7. Click Next.
8. Select DTM Networks and view the tree.
9. Select the chassis and click Add DTM.
This manual is related to the following products:
- 1734sc-IE2CH E+H Instruments via HART to PlantPAx User Manual 1769sc-IF4IH E+H Instruments via HART to PlantPAx User Manual 1794-IF8IH E+H Instruments via HART to PlantPAx User Manual 1756-IF16H E+H Instruments via HART to PlantPAx User Manual 1756-IF8IH E+H Instruments via HART to PlantPAx User Manual 1756-IF8H E+H Instruments via HART to PlantPAx User Manual