Configure a hart device – Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual User Manual

Page 44

background image

44

Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014

Chapter 3

Configure the HART Device in FactoryTalk AssetCentre Software

Configure a HART Device

1. Right click on the device an select Online.

2. Click Open.

Device information should appear.

3. Click Next.
4. Click Design.

This manual is related to the following products:

1734sc-IE2CH E+H Instruments via HART to PlantPAx User Manual 1769sc-IF4IH E+H Instruments via HART to PlantPAx User Manual 1794-IF8IH E+H Instruments via HART to PlantPAx User Manual 1756-IF16H E+H Instruments via HART to PlantPAx User Manual 1756-IF8IH E+H Instruments via HART to PlantPAx User Manual 1756-IF8H E+H Instruments via HART to PlantPAx User Manual