Appendix j, Prosonic s transmitter, Appendix – Rockwell Automation 1734sc-IE4CH E+H Instruments via HART to PlantPAx User Manual User Manual
Page 133

Rockwell Automation Publication PROCES-UM002A-EN-P - July 2014
133
Appendix
J
Prosonic S Transmitter
The Prosonic S transmitter provides non-contact level measurement of fluids,
pastes sludge and powdery to coarse bulk materials and flow measurement in
open channels and measuring weirs with 1 or 2 ultrasonic sensors. Prosonic S
offers the following:
• Time-of-flight correction via integrated or external temperature sensors.
• Simultaneous measurement of level and flow in a stormwater overflow
basin with only 1 sensor.
• Pre-programmed pump control routines.
• Automatic detection of the sensors FDU9x.
• The sensors of the former series FDU8x can be connected.
Topic
Page
Connect a Prosonic S Transmitter
Configure a Prosonic S Transmitter
Component
Catalog Number
Details
Prosonic S transmitter
FMU90-R11CA111AA1A
Firmware revision 2.00
- 1734sc-IE2CH E+H Instruments via HART to PlantPAx User Manual 1769sc-IF4IH E+H Instruments via HART to PlantPAx User Manual 1794-IF8IH E+H Instruments via HART to PlantPAx User Manual 1756-IF16H E+H Instruments via HART to PlantPAx User Manual 1756-IF8IH E+H Instruments via HART to PlantPAx User Manual 1756-IF8H E+H Instruments via HART to PlantPAx User Manual